UL817 Cable Testing Equipment Abrupt Pull Test Apparatus With 6 Working Stations

UL817:

96.4 Each molded-on representative device is to be secured in the jaws of the flexing machine so that the point of cord exit is at the center of rotation. The rotating jaws are to be adjusted to rotate to an angle of 90° to each side of the centered position. At the centered position, the cord is to hang vertically and the weight, selected in accordance with 96.3, attached to each cord approximately 1 2 inches (305 mm) from the point of rotation. See Figure 96.1 .
96.5 Each representative device is to be subjected to complete flexing cycles until a conductor in each device has opened (as determined by a continuously-monitoring detection circuit), or until 2,500 cycles is reached, whichever comes first. A flexing cycle consists of: rotation of the jaws from the vertical (centered) position until 90° to one side, back past the vertical position until 90° to the other side, and back to the vertical (centered) position. The rate of testing shall be 1 0 cycles per minute.

Description:

This device is used for the resistance abrupt pull test of Plug of plug power line, torsion test, load test and grounding current test.

According to the standard UL817 clause 96.4-96.5 Flexing test, clause 99.1-99.2 Abrupt Pull Test, clause 100.1-100.3 Jacket retention test.

Test sample: Plug power line.

Feature: Using automatic mode test, it will automatic shutdown when reach to the setting number if test times or setting time.

Technical parameters:

Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicated in providing laboratory testing equipment and production line testing system, we are now the high-tech enterprises with technical superiority and R & D capabilities in test instruments industry.

Our core technologies encompass vacuum, leak testing & automatic control, laboratory test equipment & solution. Our technical leader is an expert in leak detection, his more than 2 decades of experience are a great asset to our firm. Our technical team is comprised of wellexperienced engineers and technicians.

HongCe laboratory testing equipment are designed and manufactured as per the requirements of GB, IEC, EN, UL, VDE, BS, AS, ISO standards and etc. Our main products are: switch, plug, socket and coupler test equipment; mechanical strength impact test equipment; material fire hazard test equipment, enclosure protection test probes; waterproof and dustproof environmental testing equipment; household appliances testing equipment; wire and cable testing equipment; luminaires test equipment; electric tools test equipment; information technology and audio & video test equipment. Our products are widely used in domestic and worldwide measurement & certification institutions, inspecting mechanism, laboratories, export & import inspection and quarantine bureau, various production companies and etc. Our customer includes Bureau Veritas, CSA, ITS, UL, TUV Rheinland, TUV SUD, SGS and etc.

HongCe production line testing equipment are mainly customized according to client's workpieces, such as automatic leak testing system, gas recovery system, other tailor-made system based on vacuum & leak testing technology.