Easy Operation PLC Touch Screen Stainless Steel Battery Burning And
Ejection Test Equipment
Standard
IEC60086-4 clause 6.2.6,6.2.8 ,IEC62133,UL 1642,UL2054,GB31241 and
etc.
Applications
This battery burning tester is necessary testing equipments for
various battery manufacturer, quality inspection & control
department. With features of easy operation, safety reliable, high
accuracy, it becomes ideal testing machine for battery burning and
ejection testings.
Testing Method
1.Fix the mesh on top of the burner with 38.1mm distance,each
25.4mm mesh with 20 holes, steel wire diameter 0.43mm.
2. Ignition the burner, simultaneously observe the battery burning
situation,till battery explode or burn out. And time the whole
burning procedure.
Parameters
| Burner | Bunsen burner,pipe inner diameter 0.375inch(9.5mm)length about
100mm |
| Flame Applicate Time | 0~999.9s±0.1s |
| Flame Continuous Time | 0~999.9s±0.1s |
| Flame Height | 10~75±2mm |
| Testing Bar Diameter | 1/4 inch(6.35mm)×14 inch(355.6mm) |
| Test Cover Width | 24 inch(610mm)×14 inch(355.6mm),Octagonal |
| Test Cover Height | 12inch (305mm) |
| Testing Aluminum Mesh Diameter | 0.010 inch (0.25mm) 16hole×16hole |
| Octagonal stainless steel net cover | Distance between each other 2 feet (610mm),Octagonal net cover
height1 feet (305mm) |
| Testing Hole Diameter | 102mm |
| Fire Ignition Device | Auto fire ignition |
| Display Method | PLC Touch Screen |
| Control Method | Remote control, whole test procedure fully automatic |
| Burning Gas Requirement | High purity liquefied petroleum gas(Customer Prepare) |
| Bottom | Installed with universal wheel |
| Observation Window | 390 X 360mm(20mm thickness tempered explosion proof glass) |
| Timer | 4 bytes display ,0~9999(Hour,Minute,Second switchable) |
| Inner chamber Material | SUS304 Stainless steel |
| Outer Chamber Material | Cold rolled powder painted |
| Smoke Extractor | Φ 150mm on back side |
| Overall Dimension | W940XD780XH1620 mm |
| Power Source | AC 220V 50HZ |
| Power | 2.0KW |
Notices
1. Battery burning ejection test & particle test is high dangerous
destructive test,testing personal must be well trained with related
safety & emergency handling knowledge, avoid personal injuries.
2.Burning device should put in the filtered air ventilate
chamber,pay attention the waste air exhaust should comply with
related national standards.
3. Testing personal must wear smoke proof expiratory device and
filter expiratory devices, avoid suction harmful gas.
4. Before burning test,should strictly check the air pipe &
connections sealing performance.
5. Multi fire extinguish devices should prepared close to the
testing machine.
6. During testing or the bunsen light not totally cooling down,
forbid to touch the sample burner or mesh.
7. After finishing test, should lock all the valve and well do the
machine usage records, avoid air leakage of the gas tank.
8. Regularly check if the gas pipe broken or not,if broken, do stop
use it,and replace with new ones.
Accessories
| Aluminum Mesh | 5meters |
| Stainless Steel Mesh | 2piese |
| Remote Controller | 1piece |
| Star Cage | 1piece |
| Operation Manual | 1Copy |
