LCD Display Half-Sine Wave 300kgf Battery Test Equipment Of Vibration Shock Test Bench

Standard

IEC62133 clause 7.2.2,IEC60086-4 clause 6.4.3, IEC 60086-1, GB/T 31241-2014 and etc.

Applications

The vibration test can be used to find early failure of the battery, simulate actual condition assessment and structural strength test. The product has a wide range of applications, wide application area, and significant and reliable test results. It is an ideal battery-specific vibration for battery manufacturers, quality inspection departments and research institutes. Test Equipment. It is suitable for testing various types of single cells and battery packs such as charging treasure, lithium ion, nickel hydrogen, nickel cadmium, lead acid, and metal hydride nickel.

The vibration test can also be used for fatigue testing of products to assess the life of the product.

Parameters

Product information

It consist of Vibration System, Vibration Controller and other accessories .please refer to the information of the parts as below:

System Introduction:

1.Double magnetic circuit structure to ensure high magnetic field intensity & reduce flux leakage;

Special degaussing structure can reduce flux leakage to below 1 mt

2.U-type spring ,rollers and linear bearing for strong resistance of deflecting load

3.Air spring are used for vibration isolation; Vibration system work steadily even with heavy load;

no need special foundation

4.Protection devices are provided for over-thermal, over-load, over-current, over-voltage, and

over-displacement of the vibration tester; Electrical network protection devices for over-voltage,

under-voltage, lacking phase; Drive power , current-limiting , soft-start, over-temperature,

short-current,module fault protecting

5.Able to complete sine ,random , impact environmental tests

6.This system requires voltage fluctuation, ≤±10%

7.This system requires Grounding resistance, ≤4Ω

8.High reliability, especially suitable for long-time operation

Digital Switch Type Amplifier Introduction:

This system adopts the sine pulse width modulation technology of digital power amplifier.Its working

principle Is:using the MOSFET field-effect’s high frequency switch power, through digital circuit to amplify and restore the low-voltage signal which input by controller, Then the output the original signal to vibration

tester's moving coil circuit,and drive vibration tester's extension table movement.The main part of the digital power amplifier: the front control, power amplifier module, protection circuit, the power part and electric cabinet.

Digital Switch Type Amplifier Features:

1.Easy maintenance: Interchangeable power module box, compact design, saving space, easy to

maintenance.

2.LCD display:

Logic module adopts microcomputer CPU chip processor, LCD display function;Can be showed

various system data in detail (The power amplify output True RMS value, with additional data

display) and operation state and fault judgment.With remote control, remote measuring, remote

communication function, friendly interface, easy operation.

Digital Switch Type Amplifier Protection function:

The power amplifier set up protection of power grid over-voltage, power grid under-voltage, power

grid lack of phase, logic fault, power module, power temperature module,output over-current, output

over-voltage,driving power, the table’s displacement, table temperature, etc. Any failure occurs, shut

down output,with sound and lighting alarm at the same time. Except the above protection, also has poor

RMS value the protection, and emergency stop protection.

High conversion efficiency ( higher than 92%) ,and high convert ion frequency

Horizontal Slip Table:

With horizontal slip table ,the electrodynamic vibration tester able for X,Y,Z trial direction testing.And can combine temperature humidity test system do combined environmental testing .With turbo - scroll bar or chain wheel rotation system, one person can easily rotate the vibration bench and connect it to the horizontal table.Adopt mechanical position limitation to ensure the connection between the vibration system and horizontal slip table. Multi size slip table available, from 300mm×300mm(for small vibration system)to large specimen test 2m×2m slip table. Different bearing limitation able to perform different operation and comply different requirements. The thickness and size of the slip table will influence the vibration system performance, and affect the high limitation frequency , user can customize it.

Digital Controller Features

Vibration controller is the latest design by ucon company that adopts international advanced distributed system architecture, and its core is the latest TMS320 series 32-bit floating-point high-speed processor of TI company. Test report is automatically generated in Microsoft Word. During or after the testing, the test report can be edited, and then generated automatically or manually.

Hardware Standard

Input

(1)2 channels

(2)Resolution : 24-bit analog-to-digital conversion (ADC)

(3)Input impedance : 220 k Ω

(4) Built-in charge amplifier and ICP constant-current source, the voltage & ICP acceleration

sensor can be directly connected

(5)Signal to noise ratio: >100dB

Output

Channel Quantity :1 channel output

Resolution:24-bit digital-to-analog conversion (DAC)

Control Software Index

Random Performance Index:

Control Mode:PSD

Resolution: Max. 320000 lines

Frequency Range:DC～4800Hz

Control Dynamic Range:85dB

Control Accuracy: ±1dB ,

Closed-Loop Time: typically 100ms

SINE

Control Mode : sinusoidal waveform controlling

Frequency Range:1～5000Hz,

Dynamic Control Range:95dB

Closed-Loop Time:10ms；

Control Accuracy:±1dB；Sweep velocity 1octave/min,Q value 50

Frequency Resolution :0.001%

Sweep Velocity: linear sweep 0 to 6000hz/s; logarithmic sweep 0 ~ 100 Oct/min

Wave Distortion: <0.3%

SHOCK

Control Mode : Limited long time or wave control;

Shock Mode: half-sine wave；

Frequency Range:DC～22000Hz；

Frame: Max.32K Duration Time : 0.5-3000ms

Compensation Mode: pre-pulse, after-pulse, pre/after-pulse

Control Performance: dynamic range higher than 90dB

Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicated in providing laboratory testing equipment and production line testing system, we are now the high-tech enterprises with technical superiority and R & D capabilities in test instruments industry.

Our core technologies encompass vacuum, leak testing & automatic control, laboratory test equipment & solution. Our technical leader is an expert in leak detection, his more than 2 decades of experience are a great asset to our firm. Our technical team is comprised of wellexperienced engineers and technicians.

HongCe laboratory testing equipment are designed and manufactured as per the requirements of GB, IEC, EN, UL, VDE, BS, AS, ISO standards and etc. Our main products are: switch, plug, socket and coupler test equipment; mechanical strength impact test equipment; material fire hazard test equipment, enclosure protection test probes; waterproof and dustproof environmental testing equipment; household appliances testing equipment; wire and cable testing equipment; luminaires test equipment; electric tools test equipment; information technology and audio & video test equipment. Our products are widely used in domestic and worldwide measurement & certification institutions, inspecting mechanism, laboratories, export & import inspection and quarantine bureau, various production companies and etc. Our customer includes Bureau Veritas, CSA, ITS, UL, TUV Rheinland, TUV SUD, SGS and etc.

HongCe production line testing equipment are mainly customized according to client's workpieces, such as automatic leak testing system, gas recovery system, other tailor-made system based on vacuum & leak testing technology.