IEC60335-2-15 Automatic Kettle Life-Span Single Station Tester
0-16A Load Current Adjustable
Product Introduction
This test equipment confirms to IEC60335-2-15 clause 19.3 and
clause 22.103 standard requirements. It is used for the kettles’
dry heating test, water boiling test and insertion & withdraw with
or without current test, it can be widely used in production line
detection and laboratory measurement.
Technical Parameters
1. Input voltage: Single-phase 220V / 50HZ.
2. Load voltage: Single phase 0-250V is adjustable, current 0-16A
is adjustable.
3. One working stations, one group of load, one set of clamp.
4. Program mode: Air cooling, Water Cooling, Water Boiling,
Insertion & Withdraw W/Current, Insertion & Withdraw W/O Current.
Each test is carried out independently, each program can be
selected on the touch screen.
5. Injection Time / Pouring Time: 0-9999s is adjustable, the amount
of water is adjustable.
6. Insertion & withdraw time: 0-9999s can be preset, residence time
of the insertion & withdraw is adjustable, the residence time of
the insertion & withdraw can be calculated out according to insert
& withdraw times/min, the insert & withdraw speed is adjustable.
7. Test times: 0-999999 times can be set, the default value of the
insert & withdraw test is 10000 times.
8. Air pressure 0.5-0.6Mpa, the air compressor needs to be equipped
by user.
9. Alarm: Test Completion alarm, non-conduction alarm during load
test, non-conduction over-time alarm during water boiling and
drying test.
| S/N. | Item | Parameters |
| 1 | Control | Mitsubishi PLC |
| 2 | Display | Touch screen |
| 3 | Speed | Controlled by cylinder, can be adjusted by manual regulating
throttle |
| 4 | Test times | 0～999999, can be preset |
| 5 | Time | 0-999.9s, can be preset |
| 6 | Clamp | The position of the clamp should be manual adjusted |
| 7 | Load current and voltage | 0-16A,0-250V, adjustable |
| 8 | Load and non-load test | Can be automatically switched |
| 9 | Test station | One |
| 10 | Power supply | Single phase 220V, 50Hz |
Product Feature
1. This equipment is controlled by PLC electrical system, the whole
operation is controlled on the touch screen, all the parameters can
be preset on the touch screen, include every selection mode of the
kettle, the touch screen with the functions of manual operation,
automatic operation and real-time display.
2. With multi-function clamp, the height is adjustable, it is
suitable for testing different kinds of the kettles.
3. Load test and non-load test can be automatically switched, each
station can be tested independently, the device is with built-in
load, the output voltage and current can be adjusted according to
the standard requirements.
4. This equipment adopts floor stand structure, with casters so
that it can move freely, rigid frame, and aluminum sandblasting
clamp, the stability is better, the appearance is elegant and the
practicality is strong.
Maintenance And Precautions
1. Regular maintenance for the equipment, don't work in moister or
having water condition, work in well ventilated areas.
2. Take away the sample and close the air source and water source
and turn off the power if user no needs to continue any test after
completing the test.
3. Do not touch the heating component of the kettle avoid scalding
during testing.
Do you want to have more test ?Click here IEC60335
seriesequipment list.pdf to get the whole equipment list of IEC60335.
