Socket pull-out force test device | test plug roughness ≤ 0.8mm |
weight 1 set of stackable professional Plug Socket Tester
Product Introduction
In the field of electrical safety, the quality of sockets is an
important line of defense to protect user safety and convenience.
As a source manufacturer, we deeply understand the far-reaching
impact of every detail on user experience and safety. The HC9916
socket pull-out force test device is like a quality guardian who
strives for excellence, protecting the quality of sockets with a
professional heart. With its careful design and reliable
performance, it provides companies with accurate and correct test
results, ensuring that every socket is safe and stable in use,
allowing users to rest assured.
Product Usage
HC9916 is specially designed for testing the pull-out force of
sockets and is widely used in socket manufacturers, quality
inspection agencies, etc. By accurately testing the pull-out force
of sockets, it ensures that the sockets are firmly connected during
normal use, and prevents safety hazards caused by improper pull-out
force, such as poor contact, heating, and even short circuits,
providing users with safe and reliable electrical connection
guarantees.
Product Features
Precise test source: The test plug is made of hardened steel with a
roughness of ≤0.8mm. It is strictly designed in accordance with
TIS166-2549 and other standards (as shown in Figures A.6, A.7, A.9,
and A.10), ensuring that the test data is accurate and consistent,
laying a solid foundation for socket quality evaluation.
Flexible test configuration: Equipped with 1 set of stackable
weights and clamping system, and a safety lanyard to prevent the
test plug from falling and being damaged, it meets the testing
needs of sockets of different specifications, and the operation is
flexible and safe.
Easy operation experience: Manual operation is intuitive and
simple, without complex training, and operators can easily get
started, improving test efficiency.
Authoritative standard guarantee: It complies with international
standards IEC60884-1 and VDE0620, strictly follows international
electrical safety specifications, and the test results are
authoritative and credible.
Standard of Plug Socket Tester:
IEC 60884-1 'Plugs and socket-outlets for household and similar
purposes – Part 1: General requirements' clause 22.1, VDE0620
Application of Plug Socket Tester:
It is used to test whether the maximum force of pulling the plug
from the socket and the minimum force of pulling the single plug
pin from the plug bush is in the range of the standard required.
The clamping system is easy to operate.
Test sample of Plug Socket Tester:
Household or similar purpose sockets.
Parameters of Plug Socket Tester:
| Test plug | Test plug: made of hardened steel with roughness not exceeding 0.8
mm. The test plug is made according to TIS166-2549 - figure A.6,
TIS166-2549 - figure A.7, TIS166-2549 - figure A.9 and TIS166-2549
- figure A.10. |
| Weights | Equipped with a set of weights and a clamping system. One safety
lanyard shall be provided to prevent the test plug from falling and
damaging during use |
| Operation method | By manual |
Maximum and Minimum Withdrawal Force for Plugs Socket-Outlets:
| Rated value | Number of poles | Pulling force(N) |
| The maximum measure gauge of multipole plug pin | The minimum measure gauge of Single plug pin | The maximum measure gauge of single plug pin |
| ≤10A | 2 | 40 | 1.5 | 17 |
| 3 | 50 |
| ＞10A～16A | 2 | 50 | 2 | 18 |
| 3 | 54 |
| More than 3 | 70 |
| ＞16A～32A | 2 | 80 | 3 | 27 |
| 3 | 80 |
| More than 3 | 100 |
About Us:
Guangzhou Hongce Equipment Co., Ltd is a leading company in
inspection equipment industry, established in 2003 and located in
Guangdong, China. Our company has incorporated advanced equipment,
coupled with cutting-edge technological production processes and a
rigorous quality control system, to oversee every aspect of our
production. By integrating a team of highly skilled management
personnel with state-of-the-art equipment, along with modern
management practices, computer-aided design, and control systems,
our products have attained international standards of
excellence.The company set R&D design, production, sales as
one, specializing in producing electric wire inspection equipment
of plug and socket, mechanical robustness testing equipment of
electronics, inspection equipment of electronics’ on-fire danger,
testing indicator of anti-electric shock and solid objects' entry,
general inspection equipment, and other non-standard testing
equipment. Our products have garnered excellent sales both
domestically and internationally, and we have forged supply
partnerships with numerous reputable companies.
